DSP Professional Electric Hair Clipper Hair Trimmer Men Electric Cut Hair Cutter Machine Haircut Tool Hairdresser Clippers
Brand: DSP
Type: Hair Clipper
Model Number: E-90014SC
Power supply: 10w
Motor voltage:: AC220-240V 50/60hz
Pieces:
4 guide combs
1 cleaning brush
1 comb
1 clean the oil
SPECIFICATION
The blade of this hair clipper made of high quality special steel combined with precision workmanship.
They have undergone the most modern heat treatment and surface treatment. Therefore, it is sharp, wear-resistant and rust-resistant. Each trimmer has undergone high-voltage resistance determination and uses double-deck insulation to ensure safety and relia-bility.
OPERATING INSTRUCTIONS
Conenect the unit to a 220-240v power source and turn on the switch (1), for the mower to start working.
The side adjusting lever (2) gives cutting length adjustment between approx0.3and 2mm when cutting hair.
The other side lock button (3) is a fixed mechanism. It is used to fix the adjustment lever (2). when the button is released, adjustment lever (2) must be pressed with the thumb to avoid sudden shocks.
The zippered comb (4) can be used to increase the length of the cut to approximately 7mm, if short cut hair and following transitions are desired. The sliding comb is stretched over the lower blade to the limit stop and is simply removed after use.
The protective cover (5) is used to protect the teeth.
Instructions for aligning the blades
If the blades have been removed for cleaning or replacement, when aligning the following items should be noted.
1. The top blade teeth end should be 0.5mm from the bottom blade.
2. The right tooth of the upper blade must cover the left edge of the large right tooth of the bottom blade.
3. The left tooth of the upper blade must be aligned with the large left tooth of the lower blade.
4. Keep the screws tight after the blades are aligned.

dsp